|
Floor Scrubbing Rotary Machine
Purpose
-
To provide a clean, aseptic and attractive condition
to all resilient tiled, or hard surfaces, such as terrazzo.
Required Supplies & Equipment
-
Floor Machine with solution tank and a pad drive
assembly or brush
-
Double mopping outfit and wringer
-
Two wet mop handles and looped-end banded mop
-
Set of "Wet Floor" signs
-
Hand pads and holder
-
3M Floor pads
-
Putty knife
-
Dust mop
-
Dust pan and brush
-
Approved germicidal detergent solution appropriate
to the area
-
Wet pick-up vacuum
Process Requirements
1. Prepare equipment
Fill solution tank with correct
germicidal detergent solution. . . Fill double mop outfit two‑thirds with clean, warm water. Transport equipment to work site.
2. Prepare area
Set up "Wet Floor"
signs. . . Move obstacles such as furniture.
3. Dust mop floor
Follow Procedure 2. . . Use
clean dust mop.
4. Scrub floor
Operate the floor machine from
side to side while dispensing solution. . .Overlap on each pass to be sure entire floor has been covered. . . Use care to avoid bumping baseboards and other fixed objects. Use hand pad and holder to scrub corners and other areas not accessible
to floor machine.
5. Pick-up dirty solution
Use wet pick-up vacuum or. . . Remove
the dirty solution with the first mop. Dip the clean second mop into the clear water and rinse wringing out mop frequently. Cover entire area. . . Wipe off baseboards.
6. When floor has dried
Remove signs. . . Return furniture and other
items cleared from the area to their proper positions.
Kellermeyer Company - Your Best Source for, Indiana cleaning products |
800-445-7415
