Floor Scrubbing Auto Scrubber

Purpose

• To provide a clean, aseptic and attractive condition to all resilient tiled, or hard surfaces, such as terrazzo.

Required Supplies & Equipment

• Automatic Floor Scrubber with pad drive assembly or brush

• Mop bucket and wringer

• Wet mop handles and looped-end banded mop

• Floor Squeegee with handle

• 3M Hand pads and holder

• 3M Floor pads

• Putty knife       

• Dust mop

• Dust pan and brush

• Approved germicidal detergent solution appropriate to the area

• Set of "Wet Floor" signs     

Process Requirements

1. Prepare equipment

Fill solution tank with correct germicidal detergent solution. . . Fill mop bucket one‑half with clean water. . .Transport equipment to work site.

2. Prepare area

Set up "Wet Floor" signs. . . Move obstacles such as furniture.

3. Dust mop floor

Follow Procedure 2. . . Use clean dust mop.

4. Scrub Floor

Use light brush pressure and scrub with the squeegee down. . ."Single scrub" . . . Shut off solution a few feet prior to making any turns.  Remove any puddles with wet mop or squeegee to a point that can be reached by the automatic machine.

5. When floor has dried

Remove signs. . . Return furniture and other items cleared from the area to their proper position.

Kellermeyer Company  -  Your best source for, commercial carpet cleaning equipment.