Kellermeyer Company - Floor Stripping Rotary Machine and Ohio commercial cleaning products

Floor Stripping Rotary Machine

Purpose

To remove soil, floor finish from the floor before applying new floor finish.

Required Supplies & Equipment

Floor Machine with pad drive assembly black stripping pad or stripping brush
Wet Front Mount Wet Pick‑up Vacuum
Set of "Wet Floor" signs
2 mop buckets with wringers
2 wet mop handles with 24oz looped‑end banded mops
Dust mop
Dust pan and brush
Putty knife
Doorway mats
3M Hand pads and holder
3M Floor pads
Approved Floor Finish Stripper

Process Requirements

1. Prepare equipment

Fill mop buckets one-half with water—add proper amount of floor stripping concentrate to one of the buckets. Transport equipment to work site.

2. Prepare area

Select an area of about 200 square feet. Set up "Wet Floor" signs. Place mats so that soiled shoes can be wiped off instead of tracking dirt Into area being cleaned.

3. Dust mop floor

Follow Procedure 2. . . Use clean dust mop.

4. Wet floor

Generously spread the floor stripping solution over area with one mop. Allow the solution to set on the floor for the recommended time. . . Do not allow to dry.

5. Machine scrub

Place floor pad under machine or use brush. Scrub lengthwise along baseboards. Side to side over balance of area. Use hand pad to scrub along edges of area...Heel machine on badly soiled spots...Avoid splashing of walls.

6. Pick up dirty solution

Use wet pick-up vacuum. . . Do not allow dirty solution to dry on floor.

7. Rinse and dry floor

Using clean mop and clean water...Cover area liberally with rinse water. Pick up rinse water with vacuum. Wipe baseboards.

Kellermeyer Company - Your Best Source For, Ohio Commercial Cleaning Products.