Applying Floor Finish

Purpose

• To protect the various types of floor surfaces' and to maintain clean safe, and attractive floors throughout the facility.

Required Supplies & Equipment 

• Clean mop bucket and wringer

• Finish mop

• Approved Floor finish

• Set of "Wet Floor" signs

Process Requirements

1.  Prepare equipment

To save clean‑up time line bucket with plastic bag.

2.  Inspect floor

Make sure that floor is thoroughly dry and clean.

3.  Prepare area

Set up "Caution" signs in public areas. . Avoid blocking doors when possible. . . Place doorway mats at entrances.

4. Apply first coat

Start with clean, slightly dampened mop...immerse mop in finish.. Wring mop to eliminate dripping . . . Apply THIN coat. . . Start applying the floor finish by running the mop parallel to and next to the baseboard. . Cover remaining floor areas, using "figure 8" stroke...Use addition finish as needed. . . Be sure to cover all of area. . .Avoid splashing. . Allow first coat to dry.

5. Apply second coat

Omit baseboards this time.  Keep at least six inches away from baseboards. Apply THIN coat. This second application should be made using a "figure 8" pattern  Allow second coat to dry. Let dry as long as possible before opening to traffic.

6. Additional coats

Apply at least four to six thin coats of finish.

Kellermeyer Company  -  Your Best Source For, Michigan Building Maintenance Supplies